How It Works
Step 1 - Separate 'em!
Separate the upper and lower clicka valve.
Step 2 - Place lower Clicka inside the bag
Place the lower clicka valve (the one with sharp point) inside the bag, about one inch away from the stored products. Then place the bag on a flat surface.
Step 3 - Click 'em!
Place the upper clicka valve on the outside of the bag, position above the lower valve. Flatten the bag with your hands to eliminate wrinkle. Press in the middle of the upper clicka valve until it's "clicked".
Step 4 - Seal it closed!
Open up the clip and place the bag slightly above the clicka valves. Simply seal it closed and make sure the whole bag is inside the clip.
Step 5 - Pump it!
Place the pump on the upper clicka valve and pump it until the bag is fully vacuumed. That's it!